Analysis Rule Diagnostic Indexes
The following tables list the diagnostic indexes written by Composition Tracking analysis rule on the Composition Diagnostic Attribute of each element.
Diagnostic Indexes - Information
| Informational | Description |
|---|---|
| 0 | Composition Tracking not calculated.This value indicates that the Element is not under Composition Tracking (CompositionTrackingBalanceFlag = False) or the Element is Out of Service (ObjectStatus = OS) |
| 1 | Composition Tracking calculated successfully.This value indicates that the CompositionTrackingResults of the Element is not changed respect the previous case (e.g. no input/output are in place). |
| 2 | Composition Tracking calculated successfully.This value indicates that the CompositionTrackingResults of the Element is changed respect the previous case (e.g. input/output are in place). |
Diagnostic Indexes - Warnings
| Warning | Description |
|---|---|
| 11 | Composition Tracking calculated successfully but MISSING material was used.This warning code is raised only when the ‘Use MISSING for unknown material codes’ option is selected in the Extended parameters configuration tab. |
| 12 | WHAT IS THE DESCRIPTION FOR WARNING # 12? |
| 13 | Composition Tracking calculated successfully but the result has been affected by a stream (fixed flow or transfer) with negative reconciled value. |
| 14 | Composition Tracking calculated successfully using the default Mixing Model (Baffled).This warning code is raised only when Mixing Model Attribute is not properly configured using one of the supported values (see the paragraph Setting the mixing Model for an inventory) |
Diagnostic Indexes - Errors
| Warning | Description |
|---|---|
| 21 | Composition Tracking was not calculated due to a generic error. |
| 22 | Composition Tracking was not calculated because the composition tracking results from the previous Case is not available.This error code is raised only when the tank has a stock greater than zero on the previous case, but the composition tracking results is not initialized. Note: This error code is not raised if the tank is empty. |
| 23 | Composition Tracking was not calculated because there is an unknown material code on the composition tracking results from the previous case.This error code is raised only when the ‘Use MISSING for unknown material codes’ option is not selected in the Extended parameters configuration tab. |
| 24 | Composition Tracking was not calculated due to a missing mandatory attribute. (E.g. the MixingModel Attribute does not exists). |